Olympia Fountain - New product 2025

The Olympia fountain evokes a feeling of timeless tranquillity and classic elegance. Its simple, symmetrical design and the warm, sandy tone of the material suggest a sense of peace and stability. The classic shapes—the quatrefoil basin and the urn-like top—give it a feeling of heritage and tradition, as if it belongs in a serene, old-world garden or a quiet courtyard.

Made of Glass Reinforced Concrete( GRC),lightweight and strong materiaL.

Product Dimensions (cm):
H127.5 x D & W 167.5

Weight 190KG, 3 pieces

INSTALLATION-LOCAL/MELBOURNE METRO ONLY $500

Installation Instructions

 Step 1
 Please lay out all parts onto a clean, flat, smooth surface
 prior to assembly or installation. Read instructions prior to
 assembly or installation.

Step 2
 Put the pump in the basin, take off the lid from the pipe and
 let the pump cable run through the pipe and then go out from
 the notch under the basin, re-put the lid on the pipe.

 Step 3
 Carefully put the small base in the middle of the basin, align
 the four angles to the grooves, and then put the pillar onto
 the small base, and then place the bowl on the pillar.

Step 4
 Connect the tubing to the outlet of the pump and place it in
 the basin.

Step 5
 Always isolate the electrical mains supply before touching or
 adjusting the pump. The pump flow can be adjusted with the
 regulator, this is found on the inlet of the pump. We recommend
 starting with the flow regulator fully open and then adjusting
 down if required.

Step 6
 Connect the hose of bowl to the hose of the pillar and then cover
 the opening with the trap door.

Step 7
 If necessary, level the fountain by placing the shims provided
 underneath the fountain base. This should ensure an even water
 flow is achieved.